Spin Mop Bucket System - 2 Microfiber Heads

Mop Without Bending or Wringing by Hand

The Fuller Brush Spin Mop and Bucket makes mopping quick and easy. Just press the foot pedal to spin the mop and wring it out. Your hands stay clean and you never have to bend down.

• Hands-free wringing: the foot pedal spins the water out for you.
• You control how damp the mop is: spin more for a drier mop, less for a wetter one.
• Rotating mop head turns easily to get into corners and other hard-to-reach spots.
• Ultra-absorbent microfiber strands grab and hold dirt for a really clean floor.
• Works on all types of floors.

What's in the Box

• Microfiber mop with handle
• Spin bucket with foot pedal
• 2 microfiber mop heads (1 on the mop + 1 extra)

Tips for Best Results

• Sweep or vacuum first, then mop.
• Only fill the bucket to the fill line. The fill line is marked on the inside of the bucket. If there is too much water, the mop will not wring out.
• Don't put the mop away wet. Let it dry first.
• Oil the foot pedal once a month. This is very important to keep the spinning working. Just a few drops is all it takes (see below).
• For indoor use only.

IMPORTANT: Oil the Foot Pedal Once a Month

Oiling is very important. The foot pedal is what spins the mop. If it isn't oiled regularly, the pedal can get stiff and the spinning can stop working.

You only need a little bit (just a few drops) once a month to keep it working smoothly.

1. Turn the bucket so you can reach the moving parts around the foot pedal.
2. Put just a few drops of WD-40, light machine oil or silicone spray right on the pivot joints and gears of the pedal.
3. Press the pedal a few times to spread the oil around, then wipe away any extra.

About the Microfiber Mop Head

Microfiber is made to grab and hold dirt, which is why it cleans so well. Because it holds on to dirt so well, the mop head cannot be washed. Each strand is wrapped with thread every 1/4 inch so the head doesn't turn into a tangled ball.

• The mop head cannot be washed. Do not wash it by hand or in the washing machine.
• Depending on how often you mop and your floors, the mop head will need to be replaced from time to time. When it gets dirty or worn, simply replace it. Replacement heads are sold separately.

Product Details

• Bucket size: 20" long x 11.5" wide x 10" high
• Holds: up to 1.75 gallons (7 quarts) of water to the max fill line
• Weight: 4 lbs empty; about 12 lbs with a gallon of water
• Mop heads: microfiber, 2 included
• Use: all floor types, indoors only
• Made: made in Taiwan

Microfiber is designed to Grab and Hold the dirt so This is the reason that it: Cleans the Floor Surface Very Well. This is also the reason that Microfiber is very difficult to Rinse Clean. At each 1/4 inch – on each Strand – we wrap the Strand with thread – otherwise the Microfiber Head would become a tangled ball of individual tiny microfiber threads. Floor should be Swept or Vacuumed before Mopping.. Make sure to lubricate the mechanism after every few uses. Do not put away wet.